Sanyo Soundbar Universal Remote Codes & Program Instructions

You want to control your Sanyo Soundbar with a universal remote. In that case, you need to set up your favorite universal remote using one of the below codes.

After the code lists, you will find step by step instructions on programming your universal remote using the codes provided and two alternative methods in case that did not work.

If a code does not seem to work, try with another one. We are constantly updating our lists with new codes.

Related links:

Sanyo Blu-ray Player universal remote codes

Sanyo DVD Player universal remote codes

Sanyo TV universal remote codes

Sanyo Soundbar Universal Remote 3 Digit Codes

590, 611, 627, 661, 683

Sanyo Soundbar Universal Remote 4 Digit Codes

0157, 1156, 1166, 1176

Sanyo Soundbar Universal Remote 5 Digit Codes

20047, 10154, 10159, 10051, 10250, 20035, 30189, 30531, 20081, 21593, 20593, 20000, 20039, 20149, 21781

If you find these remote codes are not working for your device then try to follow code search on your CAB or SAT remote.

How To  Turn On Sanyo Soundbar fwsb415e Without Remote

If you want to Turn On your sanyo soundbar then there are two way one is using mobile app tv remote and other way is to use universal remote such as GE, RCA, Vizio etc.. then only you will able to turn on and turn your sanyo soundbar fwsb415e and fwsb405fs models.

ATT Remote RC7X

You can program sanyo soundbar with the RC7X remote control check the steps below:

  1. Go to “Menu”
  2. Chose “Settings”
  3. Then select “Settings & Help”
  4. Then “Remote Control”
  5. Select “Audio Device” now

With DirecTV or ATT as your Cable with DirecTV remote control

  1. Switch on “Sanyo Soundbar”
  2. Click on “VOL+” but “Muted”
  3. Chose “AV1” or “AV2”
  4. Keep press and hold “Mute” and then “Select” until it gives “2 blinks”
  5. Enter the “9 9 1” code and wait for 2 blinks
  6. Now enter “3”
  7. Then press and release “VOL+”
  8. Now face the remote to the sanyo soundbar and then keep on pressing and releasing the “CH+” key
  9. You can observe that your device is changing the volume, at that time press “Select” so it will lock the code.

If DirecTV remote controls the power of the Sanyo soundbar but not volume, try this:

  1. Select “AV1 or AV2”
  2. Then keep on press and hold the “Mute & Select” buttons
  3. Just wait until it gives “Two Blinks” and then release
  4. Now enter the code “9 9 3”
  5. Finally press “Select”

Code Search using silver Comcast remote with a red OK/Select button

  1. Switch on “Sanyo Soundbar”
  2. Once click on “AUX”
  3. Now press and hold “Setup” till you observe key blinks twice
  4. Now release “Setup”
  5. Enter “9 9 1 3”
  6. Now “AUX” key will blink twice
  7. Then press “Power” after that target your remote control to sanyo soundbar
  8. Now keep on press “CH+” until the sound bar turn off
  9. Important Point: In this code search mode, the remote control sends IR code from its library to your selected device.
  10. Then press “Setup” so that the code will be “Locked”
  11. For confirmation the aux key will “Blink Twice”

With a Comcast Xfinity remote with the red ok button

  1. First press “AUX” and then press and hold “Setup” until its blinks two times
  2. Now “Enter the code” which we mentioned above.

Lock and unlock with a Comcast Xfinity remote with the red ok button

To lock to the Sanyo soundbar:

  1. Keep on hold “Setup” until it blinks twice
  2. Now enter code “9 9 3”
  3. Then press “AUX”

But to take the lock off and then to make it independent of each device:

  1. Keep on hold “Setup” until it blinks twice
  2. Press the code “9 9 3” and then press once “vol+”

(That’s all you can chose each device which you would wanna change the volume for)

How to program a universal remote to work with a Sanyo Soundbar

There are three simple ways to set up or configure a universal remote to work with your Sanyo Soundbar. Now we are going to guide you step by step on each one of them.

How to program a universal remote to work with your Sanyo Soundbar using a code

The first method is using a keycode. With the correct code, you can program the universal remote to work with your Sanyo Soundbar. The keycode identifies the brand and model of your device.

  1. The first step is to turn the Sanyo Soundbar you want to configure ON.
  2. Then we press the TV button on your Universal Remote.
  3. Next, we need to press and hold the SETUP button of the Universal Remote until we see a light indicator flashing. (When the universal remote does this, it means that it has entered the Learning mode)
  4. Now you have to enter the code, which you can find on this website or on the instructions of the device you want to configure.
  5. Once you have entered the code, point the universal remote at the Sanyo Soundbar and press and hold the power button.
  6. When the screen switches off, then you can release the power button.

If you have followed the steps, now your Sanyo Soundbar will work with the universal remote. If your Sanyo Soundbar is not working, repeat the steps using another code.

How to program a universal remote to work with your Sanyo Soundbar using the code search function

Suppose you weren’t able to find a working code for your Sanyo Soundbar. In that case, there is another method that you can try to set up your universal remote correctly. That method uses the universal remote search function to get the correct code.

  1. First, you need to turn the Sanyo Soundbar you want to control ON. (Note: You must keep the remote control aimed at the component throughout the process.)
  2. On the universal remote, press and hold the CODE SEARCH button. When the indicator light illuminates, release the CODE SEARCH button. 
  3. After that, press and release the device button corresponding to the type of device you want the universal remote control to operate.
  4. Now we should see an indicator light blink once and remain lit.
  5. Aim the remote control at the Sanyo Soundbar and press and release the POWER ON-OFF button.
  6. Immediately right after the Sanyo Soundbar turns off, you have to press and release the ENTER button.
  7. If you do not press the ENTER button within three seconds, the remote control will send the next code in the list, and you will be required to start over from Step 2.

If you have done the procedure correctly, you should already have your Sanyo Soundbar working with the universal remote. When you find a working code using the method described, you can use the code retrieval function to identify the code for your device for future reference.

How to program a universal remote to work with your Sanyo Soundbar using the manual setup

If none of the other methods has worked for you, you can still use the Manual Set up to configure the universal remote.

  1. First, you need to point your universal remote towards the remote control of the Sanyo Soundbar you want to replace.
  2. Next, you need to press the SETUP button or MAGIC button, depending on the universal remote you have.
  3. Now you need to enter the code for manual programming that you can find on your universal remote instruction booklet.
  4. Next, you need to press a function to program on the universal remote, like TV VOLUME DOWN.
  5. Then you need to press and hold the corresponding button on the original remote of the Sanyo Soundbar you are programming.
  6. After that, we should see a light blinking. That means that this function has been saved correctly, and we can use TV VOLUME DOWN on our universal remote.

You would need to repeat the above steps for every function you want to use with the universal remote. You have to press the SETUP button to let the universal remote know that you are done programming when you have finished.

This method copies the IR signal of your original remote to the universal remote, and you rarely would have to use it as usually the other methods should work.

Final Words

We have presented an extensive list of codes for your universal remote. We have also guided you step by step through the many methods to program your universal remote.

We hope the universal remote codes and the programming methods have worked for you.

If you have another device, you can use the search on the top bar to find it. Alternatively, you also can go to our homepage and navigate the categories or brands to find them.

We are glad to have helped you.